AAEON Electronics
Home » Embedded Boards & Module » Peripherals & Carrier Boards » Carrier Boards » ECB-916M Rev. B

» ECB-916M Rev. B

COM Express Carrier Board

  • Supports COM Express Module Rev. 2.0 Pin-out Type 1/2
  • RJ-45 x 2, Supports Gigabit Ethernet
  • VGA/ DVI-D Connector
  • 7.1 Channel Audio
  • More...


ECB-916M Rev. B
ECB-916M Rev. B
ECB-916M Rev. B
ECB-916M Rev. B
ECB-916M Rev. B

Inquire Product

Product Overview

The ECB-916M is a microATX form factor board supporting Type 1 and Type 2 COM Express Modules. AAEON's standard carrier boards can be used in their default configuration or as a starting point for a custom carrier design reducing the cost and time of development. Common uses of a standard carrier are proof-of-concept and software validation which gives any project a jump start to improve time to market.

The ECB-916M offers four serial ports, one parallel port, four USB ports, PS2 keyboard/mouse, an IrDA port, and 8-bit programmable digital I/O. To take full advantage of today's high speed interfaces, the ECB-916M includes PCI-Express﹝x16﹞, PCI-Express﹝x1﹞, ExpressCard, Mini Card, standard PCI, as well as a Mini PCI. Storage needs are met with one PATA channel, four SATA connectors, one Floppy Disk Drive connector, and a CompactFlash Type II slot.

A truly full featured and versatile validation platform, the ECB-916M supports both AT and ATX power input. With 7.1 channel audio and VGA/ LVDS/ TV-out display interfaces the ECB-916M delivers a rich multimedia experience, making it the perfect platform for any market.



  • Supports COM Express Module Rev. 2.0 Pin-out Type 1/2
  • RJ-45 x 2, Supports Gigabit Ethernet
  • VGA/ DVI-D Connector
  • 7.1 Channel Audio
  • PATA Connector x 1, SATA Port x 3 (4), CompactFlash¢â Type 2 Slot x 1
  • USB Port x 5, COM Port x 2
  • PCI-Express [x16] Slot x 1, PCI-Express [x1] Slot x 1, PCI Slot x 1
  • ExpressCard Slot x 1, Mini PCI Slot x 1, Mini Card Slot x 1
  • AT/ ATX Power Input
  • LPC Connector x 1, microATX Form Factor
Board System  
Form Factor Micro-ATX
I/O Chipset Winbond W83627DHG
Ethernet Intel® 82573L, 10/100/1000Base-TX, RJ-45 x 1
10/100 Base-TX or 10/100/1000Base-TX, RJ-45 x 1 (From CPU module)
Firmware Hub x 1 (with DIP Switch for BIOS Selection)
Expansion Interface PCI-Express [x1] slot x1 ( additional 2 for test only)
PCI-Express [x16] slot x 1
==> Add a 3-pin header for SDVO enabled or disabled
PCI slot x 1
Mini PCI slot x 1
Mini Card slot x 1
ExpressCard slot x 1
Battery RTC battery socket x 1
Power Requirement AT/ATX
Dimensions 9.6" x 9.6"(243.84mm x 243.84mm)
Gross Weight 1.32 lb (0.6 Kg)
Operating Temperature 32¢ªF ~ 140¢ªF (0¢ªC ~ 60¢ªC)
Storage Temperature -40¢ªF ~ 176¢ªF (-40¢ªC ~ 80¢ªC)
Operating Humidity 0% ~ 90% relative humidity, non-condensing
COM Express Connector x2
Front Panel Control 10-pin (5x2) header
Output Interfaces DVI 29-pin + DB 15-pin stack-type connector
30-pin (15 x 2) dual-channel LVDS connector x 1
40pin (20 x 2) SDVO connector x 1
Storage 40-pin PATA connectorx1
SATA 3.0Gb/s x 3
CompactFlash™ Type 2 slot x 1
Serial Port RS-232 Port x 1
RS-232/422/485 Port x 1
USB Type-A connector x 4
Digital I/O Supports 8-bit (Programmable)
Audio Audio jack x 6, support 7.1 channel audio
Audio Codec: Realtek ALC888
Buzzer x 1
Touch Screen Yes
» Ordering Information


COM Express Carrier Board, Micro-ATX, Dual Gigabit Ethernet, 2 COM (WINBOND), USB, PCI-Express, AT/ATX, Rev.B1.1

» Datasheet
Datasheet document + Download File Size:251 KB Updated: 2013-04-23
» Manual
Manual document ECB-916M Rev. B manual + Download File Size:308 KB Updated: 2012-05-03